CasaDelGato - Images from the House of the Cat

Most viewed
DSCF0001.JPG
Before Cage 110814 viewsMy Living room before the cage was setup
2008-04-18_15-28-44.JPG
Pulling the engine10478 viewsRemoving the 460cui gas engine. (Having a forklift really made this easier.)
All 762 pounds of it!
2009-02-14_12-53-28.JPG
Position motors9505 viewsMotors were mounted to the transmission, then lifted in from below.
Transmission was then bolted to it's mounts, and the motors placed on blocks to keep everything in position
2009-03-24_16-13-34.JPG
Battery Box Bottom9304 viewsThis is the bottom of the battery box. It is 3/4" plywood with a 2x2 edge frame.
The colored boxes are pieces of plywood cut to the size of Golf Cart batteries.
DSCF0013.JPG
9298 views
DSCF0014.JPG
9148 views
2009-03-24_16-15-18.JPG
8765 viewsThis shows how there will be 6 batteries across at the back. (there are 8 across at the front)
2009-02-15_17-09-34.JPG
Building Motor Mounting Framework8574 viewsWe decided it was easiest to juts build the motor mounting framework in place. Carefully cut pieces and clamp them in place, then tack weld it all together.
DSCF0016.JPG
8173 views
DSCF0006.JPG
8158 views
DSCF0008.JPG
8092 views
2009-02-21_13-48-38.JPG
Motors Installed8003 viewsEverything is in and bolted down. The framework is mounted to the original rubber engine mounts that used to support the 460cui Gas Engine.
1718 files on 144 page(s) 1