Position motors10464 viewsMotors were mounted to the transmission, then lifted in from below.
Transmission was then bolted to it's mounts, and the motors placed on blocks to keep everything in position
|
|
Building Motor Mounting Framework9511 viewsWe decided it was easiest to juts build the motor mounting framework in place. Carefully cut pieces and clamp them in place, then tack weld it all together.
|
|
Motors Installed8864 viewsEverything is in and bolted down. The framework is mounted to the original rubber engine mounts that used to support the 460cui Gas Engine.
|
|
Painted Motor Mount7969 viewsI then sandblasted it all ,and painted it.
|
|
Completed Motor Mount7774 viewsThis is the motor mounting framework, after all the welding was complete.
|
|
Motors Wired4246 viewsI wired the motors to the Z2K using 4/0 cable.
Notice that I don't like exposed High Voltage connections. Couldn't do much about the 1000A shunt though.
|
|
3194 views
|
|
|
|