AC Power Schematic3582 viewsThis is the schematic for the AC inlet power.
There are both 120V (standard 20A plug) and 240V (CS6375) AC power inlets.
Each has a separate breaker, and only 1 breaker can be ON at a time due to a mechanical interlock.
|
|
Zilla Coolant Pump3365 viewsI bought a submersible pump for the Z2K cooling. I'm going to use the existing coolant reservoir from the truck as the tank.
I had to cut a hole in the top so I could insert the pump.
|
|
Motor wiring, parallel3311 viewsThis shows how I originally wired the 2 motors in parallel to the Z2K controller.
|
|
Motor Cooling blower3092 viewsThis is the ductwork box I had to build so I can run a hose to each motor.
The box is built out of 3/16" ABS. The blue plate is a metal mounting plate so I can bolt the assembly to the frame.
|
|
Blower Mounted2812 viewsAt the back left you can see where the Blower has been mounted. It blows down into the box I built, and there is a 3" flex tube running to the shroud on each motor.
|
|
Zilla Mounted2750 viewsA closer view of the Z2K mount
|
|
|
|
|
|
