Pulling the engine11035 viewsRemoving the 460cui gas engine. (Having a forklift really made this easier.)
All 762 pounds of it!
|
|
Before Cage 110945 viewsMy Living room before the cage was setup
|
|
Position motors10121 viewsMotors were mounted to the transmission, then lifted in from below.
Transmission was then bolted to it's mounts, and the motors placed on blocks to keep everything in position
|
|
Battery Box Bottom9866 viewsThis is the bottom of the battery box. It is 3/4" plywood with a 2x2 edge frame.
The colored boxes are pieces of plywood cut to the size of Golf Cart batteries.
|
|
9444 views
|
|
9307 viewsThis shows how there will be 6 batteries across at the back. (there are 8 across at the front)
|
|
9278 views
|
|
Building Motor Mounting Framework9170 viewsWe decided it was easiest to juts build the motor mounting framework in place. Carefully cut pieces and clamp them in place, then tack weld it all together.
|
|
Motors Installed8582 viewsEverything is in and bolted down. The framework is mounted to the original rubber engine mounts that used to support the 460cui Gas Engine.
|
|
8334 views
|
|
8290 views
|
|
8224 views
|
|
| 1718 files on 144 page(s) |
1 |
 |
|
|
|
|
|
|
|
|
|
