Motor Cooling blower3092 viewsThis is the ductwork box I had to build so I can run a hose to each motor.
The box is built out of 3/16" ABS. The blue plate is a metal mounting plate so I can bolt the assembly to the frame.Apr 09, 2009
|
|
Zilla Coolant Pump3365 viewsI bought a submersible pump for the Z2K cooling. I'm going to use the existing coolant reservoir from the truck as the tank.
I had to cut a hole in the top so I could insert the pump.Apr 09, 2009
|
|
Blower to cool the motors4687 viewsThis is a 3 speed 12V blower I got from Surplus center.
I plan on having it come on in low speed whenever I turn the truck on, and it will switch to hi-speed if any of the motor thermostats trigger.Apr 09, 2009
|
|
Motor Shroud for Blower5332 viewsThis is the shroud I wrap around each motor (Brush end) to connect the ductwork from the blower.
It's made out of 4" wide aluminum flashing. Just cut with a carpet knife, and flex the cuts apart.Apr 09, 2009
|
|
Zilla Mounted2750 viewsA closer view of the Z2K mountMar 21, 2009
|
|
Zilla Mounted4244 viewsThis shows where the Z2K Controller is mounted.Mar 21, 2009
|
|
|
|
|